컨텐츠 바로가기


board


현재 위치

  1. 게시판
  2. 자료실

자료실

MUP 제품 자료실 입니다

Takamine PreAmp-AccuraAcoustic
제목 Takamine PreAmp-AccuraAcoustic
작성자 대표 관리자 (ip:)
  • 작성일 2007-11-21 20:12:38
  • 추천 추천 하기
  • 조회수 1627
  • 평점 0점
 

THE TAKAMINE ACCURACOUSTIC PREAMP

CREATE YOUR OWN CURVE.


 



        N4B Diagram
 



Takamine의 프로용고급 Parametric EQ 시스템

"ACCURACOUSTIC PREAMP"에 대한 구조설명과 이해

1.  "Easy-Out' Battery Compartment" 
  -9V 밧데리 장착을 간편하게 할수있습니다.

 

2. " Finger Grips"
   -뚜껑양옆의 그립을 눌러서 열면 밧데리 케이스가 빠져나오며, 손쉽게 교환하실수있습니다.
   -밧데리 교환시는 +/-표시에 따라 바르게 위치 시키면 됩니다.

 

3. "Indicator LEDs for Battery Check" & "Battery Check Switch"
   -밧데리의 잔량을 확인 하시는 기능입니다.
   - Battery Switch를 눌러면 Slide Knob의 LED가 켜지므로 밧데리 상태를 확인합니다.
   -어두운 곳에서는 LED빛으로 조정에 편리하며, "Check Switch"를 다시 누르면 LED까 꺼집니다.
   -밧데리의 잔량에 따라 밝기가 다릅니다.  잔량이 아주 적으면 밝기가 아주 약해집니다. 확인후 교환합니다.

 

4. "Retractable Volume Knob"
   -보륨 조정용 Knob입니다. 눌러서 위로 Pop Up 된 상태에서 원하는 만큼의 보륨을 조정한후,
   -눌러서 Knob를 밑으로 고정시켜 원하는 안정위치로 둘수있는 편리한 기능입니다..
    (이동이나 연주중 세팅해둔 보륨의 크기를 그대로 조정상태로 안심하고 둘수있습니다.)

 

5. "Bass Tone"  " Treble Tone"  - Graph-EX Slide Knob
  - Graph EQ기능으로서 Bass 와 Treble 의 음역을 아래위 16단계의 조정이 가능합니다.
  - 자신의 연주내용에 따른 적절한 기타 음색을 찾는 방법은 먼저 원하진않는 음역의
     내용을 조금씩 빼나가는 것으로 아래(-방향) 쪽으로 약간씩 Slide Knob를 내려 조정해보면서
     적절한 음색을 찾아내는 것이 도움이 될수있는 빠른 방법입니다.
  - 위 조정기능의 Knob를 전부 +최고치의 위치에 두면 Output의 신호가 증가되며, 앰프의 내용에 따라
     음의 외곡(Distortion)현상이 발생될수도 있습니다. 이때는 적절한 - 조정이 필요합니다.

 

4.  "Parametric EQ Frequency" "Parametric EQ Level"
- 라이브/레코딩에 편리한 고급기능 Para EQ(between 89 Hz and 10 kHz)
    - "Parametric EQ"의 Frequency Knob를 조정하여 원하는 특정 음역의 내용을 선택하여 구사할수있으며,
       Level Knob로서 원하는 특정음역의 레벨을 조정함으로서 보다 다양한 음색을 구사할수있습니다.
    - 또한 라이브나 레코딩시 당면하는 어려움인 Feedback문제를 쉽게 조절할수가 있습니다.
    -이 기능으로 연주/합주하려는 목적에 따라 보다 다양하고 박진감있는 음색과 더불어 합주하려는
      다른 악기와 잘 어울리는 기타 음색을 라이브나 레코딩시 보다 자유로히 구사할수있습니다.

 

4. "EQ Active/ By Pass Switch"
- EQ기능의 선택과 By Pass로서 EQ기능을 배제한 Piezo Pickup만에 의한 Guitar Sound의 선택가능
- 보다 다양한 사운드의 선택으로 라이브나 레코딩시 사운드조정의 폭을 넓힐수있습니다


ACCURACOUSTIC PREAMP FEATURES

            
  1. The 'Easy-Out' Battery Compartment makes changing the
            9-volt battery simple. By releasing the 'latch' on the top of the
            compartment cover, the battery case slides out by grabbing the 'finger
            grips' on either side the cover. Position the 9-volt battery in the case as
            indicated by the + symbol, (on the latch side of the battery case).

     
            
  2. The Battery Check Switch allows the player to quickly
            test the available 'power' of the user-installed 9-volt battery. The

            Indicator LEDs
    located in each slider knob will illuminate once the
            Battery Check switch is depressed. These will glow brightly when the battery
            is fully-charged or new. The LEDs will become noticeably dimmer as the
            battery's charge grows weak, thereby alerting the player that it is time to
            change the battery. For performing in dimly-lit areas, the Indicator LEDs
            can be turned on to make locating the slider controls easier. Depress the
            Battery Check Switch down until it locks. To turn off the
            LEDs, press down switch again to release.

     
            
  3. Guitar output volume, or gain is controlled by the Volume knob.
            Once a player's desired volume is set, this knob can be retracted into the
            preamp by pushing it down until it clicks. This feature prevents the player
            from accidently bumping the volume control out-of-position while playing, or
            losing a desired setting when moving the guitar from place to place. By
            simply pushing down the volume knob again, it will 'pop up' for easy
            adjustment.

     
            
  4. Tone adjustment for the AccurAcoustic is divided into the three controls
            for acoustic guitar sound: two fixed frequency ranges: Bass and Treble, and
            a variable frequency range: Parametric EQ. The Bass
            and Treble sliders allow the player to increase, or
            decrease each frequency range (or shelf) 16 decibels, to enhance the deep or
            bright portion of the sound. The center of each slider is the 'zero point',
            and the user will hear no change in tone at this setting. By sliding each
            knob towards the +16 position, each tonal range (Bass, or
            Treble) will be enhanced respectively. By decreasing each
            knob towards the -16 position, each range will be reduced similarly. The
            Parametric EQ controls allow more selective adjustment by
            'sweeping' through the tonal frequency range. The player can boost a desired
            tone, remove an unwanted tone, or even help control feedback problems. By
            first bringing the Parametric EQ Level up above '0'
            (towards the +16), the Parametric EQ Frequency that is
            being boosted can be heard. By sliding the Frequency knob
            up or down, the player can locate (by ear); a desired tone to be boosted, or
            an unwanted tone that can be 'cut' (by lowering the Level knob
            below '0'). Also, tone areas sensitive to feedback can be located this way,
            and when found, can be 'cut', giving the player more gain without feedback
            problems.

            

            For best sound performance, it is advised to think 'subtractively' when
            adjusting guitar tone. This means reducing the tone(s) that you do not
            desire first, then enhancing the tone(s) you do want from there. If all
            sliders are positioned on the minus (-) side of the zero point, this will
            make your output signal weaker. Conversely, if all sliders are positioned on
            the plus (+) side of zero, this will increase your output signal. Sliders
            pushed all the way to the +16 position may cause some sound distortion. Try
            to balance your chosen slider settings above and below the zero point.
첨부파일
비밀번호 삭제하려면 비밀번호를 입력하세요.

목록

삭제 수정 답변

댓글 수정

비밀번호

수정 취소

/ byte

댓글 입력

이름 비밀번호 관리자답변보기

확인

/ byte


* 왼쪽의 문자를 공백없이 입력하세요.(대소문자구분)

관리자에게만 댓글 작성 권한이 있습니다.