컨텐츠 바로가기


board


현재 위치

  1. 게시판
  2. 자료실

자료실

MUP 제품 자료실 입니다

Takamine PreAmp-Graph-EX
제목 Takamine PreAmp-Graph-EX
작성자 대표 관리자 (ip:)
  • 작성일 2007-11-21 20:11:22
  • 추천 추천 하기
  • 조회수 1621
  • 평점 0점
 

THE TAKAMINE GRAPH-EX PREAMP

TOTAL TONAL CONTROL.


 

 



Takamine의 대표적 EQ 시스템인

"GRAPH-EX PREAMP"에 대한 구조설명과 이해

 

1.  "Easy-Out' Battery Compartment" 
  -9V 밧데리 장착을 간편하게 할수있습니다.

 

2. " Finger Grips"
   -뚜껑양옆의 그립을 눌러서 열면 밧데리 케이스가 빠져나오며, 손쉽게 교환하실수있습니다.
   -밧데리 교환시는 +/-표시에 따라 바르게 위치 시키면 됩니다.

 

3. "Battery Check indicator Light" & "Battery Check Switch"
   -밧데리의 잔량을 확인 하시는 기능입니다.
   - Battery Switch를 눌러면 Batetry LIght가 켜지므로 밧데리 상태를 확인합니다.
   -밧데리의 잔량에 따라 밝기가 다릅니다.  잔량이 아주 적으면 밝기가 아주 약해집니다. 확인후 교환합니다.

 

4. "Retractable Volume Knob"
   -보륨 조정용 Knob입니다. 눌러서 위로 Pop Up 된 상태에서 원하는 만큼의 보륨을 조정한후,
   -눌러서 Knob를 밑으로 고정시켜 원하는 안정위치로 둘수있는 편리한 기능입니다..
    (이동이나 연주중 세팅해둔 보륨의 크기를 그대로 조정상태로 안심하고 둘수있습니다.)

 

5. "Bass Tone" " Mid-Range Tone"  & Treble Tone"  - Graph-EX Slide Knob
  - Graph EQ기능으로서 Bass/ Middle/ Treble 세가지 범주의 음역을 아래위 5단계의 조정이 가능합니다.
  - 자신의 연주내용에 따른 적절한 기타 음색을 찾는 방법은 먼저 원하진않는 음역의
     내용을 조금씩 빼나가는 것으로 아래(-방향) 쪽으로 약간씩 Slide Knob를 내려 조정해보면서
     적절한 음색을 찾아내는 것이 도움이 될수있는 빠른 방법입니다.
  - 위 세가지 기능의 Knob를 전부 +5의 위치에 두면 Output의 신호가 증가되며, 앰프의 내용에 따라
     음의 외곡(Distortion)현상이 발생될수도 있습니다. 이때는 적절한 - 조정이 필요합니다.

 

4. "Adjustable Aural Exciter"
    -전문 레코딩 스튜디오에서 사용되는 기능인 "다이나믹 시그널 프로세스" 기능입니다.
    -Slide  Knob를 조정하여 기타원래의 음역에 하모닉스음의 변화로서 Presence와 Clarity를 조정합니다.
    -이 기능으로 연주/합주하려는 목적에 따라 보다 다양하고 박진감있는 음색과 더불어 합주하려는
      다른 악기와 잘 어울리는 기타 음색을 자유로히 구사할수있습니다


GRAPH-EX PREAMP FEATURES

            
  1. The 'Easy-Out' Battery Compartment makes changing the
            9-volt battery simple. By releasing the 'latch' on the top of the
            compartment cover, the battery case slides out by grabbing the 'finger
            grips' on either side the cover. Position the 9-volt battery in the case as
            indicated by the + symbol, (on the latch side of the battery case).

     
            
  2. The Battery Check Switch allows the player to quickly
            test the available 'power' of the user-installed 9-volt battery. The

            Battery Check Indicator Light
    will illuminate once the Battery
            Check switch is depressed. The indicator light will glow brightly when the
            battery is fully-charged or new. This light will become noticeably dimmer as
            the battery's charge grows weak, thereby alerting the player that it is time
            to change the battery.

     
            
  3. Guitar output volume, or gain is controlled by the Volume knob.
            Once a player's desired volume is set, this knob can be retracted into the
            preamp by pushing it down until it clicks. This feature prevents the player
            from accidently bumping the volume control out-of-position while playing, or
            losing a desired setting when moving the guitar from place to place. By
            simply pushing down the volume knob again, it will 'pop up' for easy
            adjustment.

     
            
  4. Tone adjustment for the Graph-EX is divided into the three most desired
            ranges for acoustic guitar sound control: Bass,

            Middle
    , and Treble. Each of these sliders allow
            the player to increase, or decrease each frequency range (or shelf) 5
            decibels, to 'color' the sound, or to help control feedback problems. The
            center of each slider is the 'zero point', and the user will hear no change
            in tone at this setting. By sliding each knob towards the +5 position, the
            tonal range (Bass, Middle, or

            Treble
    ) will be enhanced respectively. By decreasing each knob
            towards the -5 position, each range will be reduced similarly. For best
            sound performance, it is advised to think 'subtractively' when adjusting
            guitar tone. This means reducing the tone(s) that you do not desire first,
            then enhancing the tone(s) you do want from there. If all sliders are
            positioned on the minus (-) side of the zero point, this will make your
            output signal weaker. Conversely, if all sliders are positioned on the plus
            (+) side of zero, this will increase your output signal. Sliders pushed all
            the way to the +5 position may cause some sound distortion. Try to balance
            your chosen slider settings above and below the zero point.

     
            
  5. The Exciter is a dynamic signal processor commonly used
            in professional recording studios. By adjusting the Exciter
            control from Minimum to Maximum , the guitar sound will increase in presence
            and clarity by extending the harmonics of the guitar signal. The player can
            adjust the amount of Exciter processing to his/her
            listening preference, or to better blend with other players in performance.
첨부파일
비밀번호 삭제하려면 비밀번호를 입력하세요.

목록

삭제 수정 답변

댓글 수정

비밀번호

수정 취소

/ byte

댓글 입력

이름 비밀번호 관리자답변보기

확인

/ byte


* 왼쪽의 문자를 공백없이 입력하세요.(대소문자구분)

관리자에게만 댓글 작성 권한이 있습니다.